Propane Tanks

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


•  Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. All standard vessels UL listed (UL 644 – Container Assemblies for LP-Gas). Standard vessels available with CRN (Canadian Registration Number).


•  Vessels are either powder coated with TGIC polyester or primed with liquid epoxy and coated with liquid urethane top coat.


•  All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.



 

50-60 BAGS/PALLET

W/10’ #12 COPPER WIRE

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


•  Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. All standard vessels UL listed (UL 644 – Container Assemblies for LP-Gas). Standard vessels available with CRN (Canadian Registration Number).


•  Vessels are either powder coated with TGIC polyester or primed with liquid epoxy and coated with liquid urethane top coat.


•  All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.



 

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


•  Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. All standard vessels UL listed (UL 644 – Container Assemblies for LP-Gas). Standard vessels available with CRN (Canadian Registration Number).


•  Vessels are either powder coated with TGIC polyester or primed with liquid epoxy and coated with liquid urethane top coat.


•  All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.



 

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


• Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. Some standard vessels available with CRN (Canadian Registration Number).


• Vessels shipped with durable ready-to-bury coating. Vessels, depending on manufacturing location, are either powder coated with phenolic epoxy, painted with a single application urethane coating, or primed with liquid epoxy and coated with liquid epoxy top coat – all providing a durable ready-to-bury coating.


• All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


•  Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. All standard vessels UL listed (UL 644 – Container Assemblies for LP-Gas). Standard vessels available with CRN (Canadian Registration Number).


•  Vessels are either powder coated with TGIC polyester or primed with liquid epoxy and coated with liquid urethane top coat.


•  All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.



 

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


• Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. Some standard vessels available with CRN (Canadian Registration Number).


• Vessels shipped with durable ready-to-bury coating. Vessels, depending on manufacturing location, are either powder coated with phenolic epoxy, painted with a single application urethane coating, or primed with liquid epoxy and coated with liquid epoxy top coat – all providing a durable ready-to-bury coating.


• All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


• Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. Some standard vessels available with CRN (Canadian Registration Number).


• Vessels shipped with durable ready-to-bury coating. Vessels, depending on manufacturing location, are either powder coated with phenolic epoxy, painted with a single application urethane coating, or primed with liquid epoxy and coated with liquid epoxy top coat – all providing a durable ready-to-bury coating.


• All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.

General Specifications

• Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1.


• Complies with NFPA 58.


• Rated at 250 psig from -20° F to 125° F. All vessels registered with National Board. Some standard vessels available with CRN (Canadian Registration Number).


• Vessels shipped with durable ready-to-bury coating. Vessels, depending on manufacturing location, are either powder coated with phenolic epoxy, painted with a single application urethane coating, or primed with liquid epoxy and coated with liquid epoxy top coat – all providing a durable ready-to-bury coating.


• All vessels are shipped vacuum pre-purged to enable simplified first fill of the vessel.