Quickorder
Grand Canyon Valves
Millivolt Electronic Ignition NG Kit
This compact system sits in your fire box next to the burner system and functions off of 2 D cell batteries.
Includes fittings, Switch on heat Shield & can be requested to be installed on burner.
MVKEIKN/LP use on ALL KIVA, 1BRN, 2BRN’s, & 3BRN up to 24”.
Add 8” to front width for proper centering
REMOTE OR WALL SWITCH CAN BE ADDED
Modulating Millivolt LP Valve - 85 k
Indoor Use Only. Available in a 85K standard option ONLY. MMVR-NG/LP use on ALL KIVA, 1BRN, 2BRN’s, & 3BRN up to 24”.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
REMOTE & RECEIVER INCLUDED
Millivolt Valve Propane Gas Kit - 82 k
Indoor Use Only. MVQMKN/LP used on ALL KIVA,1BRN, 2BRN’s, & 3BRN up to 24”.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
MUST ADD GCRK OR GCWS FOR VALVE TO IGNITE.
Propane Gas Safety Pilot Kit - 90 k
Indoor Use Only. SPQMKN/LP used on ALL KIVA, 1BRN, 2BRN’s, & 3BRN up to 24”.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
HC Indoor Manual Valve - 270 k
Indoor Use Only. MAHC used on ALL 3BRN 30” and greater, ALL Jumbo Burners.
Includes fittings & can be requested to be installed on burner.
Add 4” to front width for proper centering
High Capacity Millivolt LP Kit - 240 k
Indoor Use Only. HCMVQMKN/LP used on ALL 3BRN 30” and greater, ALL Jumbo Burners.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
MUST ADD GCRK OR GCWS FOR VALVE TO IGNITE.
High Capacity Safety Pilot NG Kit
Indoor Use Only. HCSPK-N/LP used on ALL 3BRN 30” and greater, ALL Jumbo Burners.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
Natural Gas Safety Pilot Kit - 90 k
Indoor Use Only. SPQMKN/LP used on ALL KIVA, 1BRN, 2BRN’s, & 3BRN up to 24”.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
Millivolt Electronic Ignition LP Kit
This compact system sits in your fire box next to the burner system and functions off of 2 D cell batteries.
Includes fittings, Switch on heat Shield & can be requested to be installed on burner.
MVKEIKN/LP use on ALL KIVA, 1BRN, 2BRN’s, & 3BRN up to 24”.
Add 8” to front width for proper centering
REMOTE OR WALL SWITCH CAN BE ADDED
High Capacity Millivolt NG Kit - 240 k
Indoor Use Only. HCMVQMKN/LP used on ALL 3BRN 30” and greater, ALL Jumbo Burners.
Includes fittings & can be requested to be installed on burner.
Add 6” to front width for proper centering
MUST ADD GCRK OR GCWS FOR VALVE TO IGNITE.
