Multi-Sided Logs and Burners

30” Vented/Vent-Free Vista Multi-Sided Burner, Intermittent Pilot with Thermostat Variable Remote Control, AC Adaptor and Battery Backup, 40K BTU.

For use with 30” Log Set.

It can be controlled manually or by remote or wall switch (sold separately). There is no flame control or temperature adjustment with this burner.

A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance.

18” Vented/Vent-Free Vista Multi-Sided Burner, Intermittent Pilot with Thermostat Variable Remote Control, AC Adaptor and Battery Backup, 36K BTU.

For use with 18” Log Set.

It can be controlled manually or by remote or wall switch (sold separately). There is no flame control or temperature adjustment with this burner.

A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance.

Loft Series 24” Intermittent Pilot Multi-Sided Vent-Free Burner with Thermostat Variable Remote Control. Propane.

 

Fits Empire VF Peninsula and See-Through Fireboxes

 

For a VFIU burner in a vented application, replace the included Thermostat Remote with an
on/off switch or remote.

 

Requires:
• Three DG1 bags of glass to cover both sides of the burner top. Additional glass
may be required to cover the floor of a large firebox..
• Use as Vented System requires switch or On/Off Remote

 

18” Vented/Vent-Free Vista Multi-Sided Burner with Millivolt Valve ON/OFF Switch in log piece, 36K BTU.

For use with 18” Log Set.

It can be controlled manually or by remote or wall switch (sold separately). There is no flame control or temperature adjustment with this burner.

A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance.

18” Vented/Vent-Free Vista Multi-Sided Burner with Millivolt Valve ON/OFF Switch in log piece, 36K BTU.

For use with 18” Log Set.

It can be controlled manually or by remote or wall switch (sold separately). There is no flame control or temperature adjustment with this burner.

A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance.

30” Vented/Vent-Free Vista Multi-Sided Burner, Intermittent Pilot with Thermostat Variable Remote Control, AC Adaptor and Battery Backup, 40K BTU.

For use with 30” Log Set.

It can be controlled manually or by remote or wall switch (sold separately). There is no flame control or temperature adjustment with this burner.

A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance.

Requires Slope Glaze Vista Burner

 

Requires Slope Glaze Vista Burner

 

Loft Series 24” Intermittent Pilot Multi-Sided Vent-Free Burner with Thermostat Variable Remote Control. Natural Gas.

 

Fits Empire VF Peninsula and See-Through Fireboxes

 

For a VFIU burner in a vented application, replace the included Thermostat Remote with an
on/off switch or remote.

 

Requires:
• Three DG1 bags of glass to cover both sides of the burner top. Additional glass
may be required to cover the floor of a large firebox..
• Use as Vented System requires switch or On/Off Remote

 

Loft Series 24” Millivolt Multi-Sided Vent-Free Burner. Natural Gas.

 

Fits Empire VF Peninsula and See-Through Fireboxes

 

Requires:
• Three DG1 bags of glass to cover both sides of the burner top. Additional glass
may be required to cover the floor of a large firebox..
• Use as Vented System requires switch or On/Off Remote